Showing posts with label Lotus. Show all posts
Showing posts with label Lotus. Show all posts

UK Garage Presents Lotus Extrema

Italian tuner UK Garage is presenting its latest project, the Lotus Exige-based Extrema. UK Garage works on such names as TVR, Noble and Radical. Plenty of work has gone into the Extrema from when it was an Exige up until its current format.

Beginning with engine, buyers are spoiled for choice as they wade through a list that comprises exclusively of GM powerplants. At the entry point is a 2.6-litre with 360hp (265kW) followed by a 2.8-litre making 450hp (331kW) or a 560hp (412kW) 3.4-litre version. All three use a PowerTech V8 engine weighing 95kg. With this engine total vehicle mass does not exceed 750kg.

Moving to the next menu is GM's 2.8-litre V6 turbo that either produces 300hp (221kW) or 350hp (257kW). With this mill fitted the car goes up to 850kg in weight which is still very light. Up the performance ladder is where things get more interesting. UK Garage offers potential customers a register comprised of Chevrolet and Corvette powerplants that will be fitted into their Extremas. Again starting from the bottom there are two Chevrolet LS3s making either 420hp (309kW) or 500hp (368kW) each. At this level weight goes up a notch to about 970kg.

Those who long for absolute Extrema grunt, the 513hp (377kW) LS7 or the LS9 found in a Corvette ZR1 with 647hp (476kW) can be selected. This time vehicle mass reaches 1,000kg. This particular combination allows the Extrema to reach 100km/h from standstill in 2.8 seconds, 0 - 200km/h in 7 seconds and top off at 320km/h. Gearshifts are taken care of courtesy of either a manual or a sequential transmission system.

The Extrema has an aluminium chassis, and buyers can have either fiberglass or a kevlar-carbon composite body fitted. The body has been lengthened by some 20cm to accommodate these big engines. It has also been widened for the bigger tyres and equipped with an adjustable suspension system.

All this comes at a price of €66,000 including taxes for the baseline model while road-legal conversions can be made at extra cost.

All Carbon-Fiber Lotus Elise

Carbon fiber saves a lot of weight and is increasingly used in performance cars. But making a whole car out of carbon fiber may just end up being a tad too expensive. But someone has given it a go anyway.

Pictured here is a 2002 Type 72 JPS Lotus Elise built (or re-built?) to order for a Chinese customer by TW Auto Limited.

The Hong Kong based TW Auto has completely replaced both the interior and exterior with customized raw carbon fiber panels. The weight saved on the already feather-ous Lotus Elise? 66 to 88 pounds (or about 40 kg).

Additionally, the diet also included a lighter KW suspension, Lotus Racing exhaust, JP Racing wheels, as well as bigger air intake and air filter.

The re-working of the Elise took a whole 6 months for TW to complete for customer Jimmy Wong.

Lotus Elise styling package by Project Kahn

One of Project Kahn's major missions when transforming a normal Lotus Elise into what you see here was to help owners of the car stand out from a possible sea of other Elise owners out there. As a 60th anniversary project for Lotus, Kahn went even sportier with the Elise, installing a full aerodynamic body styling package.

Front spoiler, ventilated front wings, side sills, rear spoiler and larger side intake ducts are some of the exterior alterations done. Interior also received some attention with a full leather compliment fitted. In addition Kahn provided a sports exhaust system to improve engine breathing and then improved handling with a lowered suspension with 28 stage dampeners. Improving the handling of an Elise is quite a tall order, given the car's established high credentials on a track, but Project Kanh is confident they have done it.

Lotus Exige S by 'Union Jack'

The Lotus Exige must be one of the most curvy car designs pounding our roads at present. So when Discovery Channel’s popular series ‘How Do They Do It?’ needed a donor car to show how a professional team wraps vehicles in all manner of advertisements and murals, they chose a difficult specimen in the Exige.

A team of four expert technicians took 10 hours to completely wrap the Exige in its new red, white and blue livery and the Lotus is said to be a real crowd pleaser on the track.

Mike Kimberley, CEO of Group Lotus commented, “At Lotus we pride ourselves in spearheading the development of technology in the vehicle market and working on this project was a truly unique opportunity. Lotus Design captured a very special element of our heritage with the brief, ‘great British racing’. The Union Jack theme and the flying flag concept perfectly embody the Lotus spirit”.

Lotus intends to show the unique Exige at a number of UK dealers over the next few months as part of its ‘Lotus Roadshow’.

Press release:

'Union Jack' Lotus Exige 'S' hits the great British roads
It’s not unusual for a Lotus Exige ‘S’ to turn heads, but one particular car is rousing more curiosity than most. Covered in a patriotic red, white and blue Union Jack design, one Exige ‘S’ is the recent star of the Discovery Channel’s popular series ‘How Do They Do It?’.
With its voluptuous curves and cut-away details, the Exige is one of the most distinctive and unique cars on the road, so it was a perfect choice for the ‘How Do They Do It?’ team who were looking for a challenging case study for their vehicle wrapping feature. ‘Totally Dynamic’ who specialise in the application of vinyl wraps were assigned the project and took 10 hours to transform the iconic Exige for the documentary which follows the project from brief to the finished car making its track debut.
The scheme was developed by Lotus Design to move away from the traditional static Union Jack to that of a flying flag to show the essence of movement and speed. The finished car is a real attention seeker and has amazing track presence.
Lotus has a fantastic history of producing one-off and collectors-edition cars and Union Jack Exige sits amongst Lotus most exceptional and extraordinary looking vehicles. Mike Kimberley, CEO of Group Lotus commented, “At Lotus we pride ourselves in spearheading the development of technology in the vehicle market and working on this project was a truly unique opportunity. Lotus Design captured a very special element of our heritage with the brief, ‘great British racing’. The Union Jack theme and the flying flag concept perfectly embody the Lotus spirit”.
‘Totally Dynamic’ supplied the expertise for the intricate process in which a team of 4 installation technicians expertly applied a vinyl wrap to the Exige ‘S’, transforming the car in just 10 hours. The process was exciting but extremely complex, as ‘Totally Dynamic’ MD Adrian Rope explained, “Our whole team was excited by the challenge that the Lotus Exige’s stunning contours presented us. It was a pleasure working on such a thoroughbred car and our experience with high performance vehicles was crucial to creating the professional finish it deserved.
“It was a real privilege to have been chosen out of all the vehicle wrapping companies in the UK by the Discovery Channel and Lotus and their faith in us demonstrates why Totally Dynamic is the cutting edge choice for vehicle transformation.”
For a limited time the Union Jack Lotus Exige ‘S’ will be joining the Lotus Roadshow which consists of the latest Lotus models and is visiting the UK network of Lotus dealers.

Lotus Exige 270E TriFuel at Geneva Motor Show

Interesting times indeed for the world that even a purist automaker like Lotus is getting ready to mesmerise mother nature as it reveals the Exige 270E Tri-fuel. Tri-fuel runs on methanol, bioethanol and petrol/gasoline. It has a top Vbox reading of 255km/h, having dispatched the 0 - 100km/h time in 3.88 seconds.

Both methanol and bioethanol contain a significant amount of pure alcohol, which basically means the more your car can drink, the better life will be for the environment. Lotus is betting that this happens, particularly in sync with widespread availability of the fuels worldwide. This is the part that might hamper the Lotus Exige 270E Tri-fuel’s progress.

The Lotus Exige 270E Tri-fuel dons a 1.8-litre engine which, with the help of a mechanical blower (aka supercharger), dispenses 270 bhp – hence the name – or 201kW at 8000rpm and 260Nm, making it the most potent road Lotus out there. Lotus will unveil the covers off a 270E Tri-fuel at Geneva in the next couple of days.

Press Release

Lotus Engineering, the world renowned automotive consultancy division of Lotus, unveils its latest development towards carbon neutral road transport at the 78th Geneva International Motor Show. The Lotus Exige 270E Tri-fuel is the most powerful road version yet of the Exige (0-60 mph / 96 kph in 3.88 seconds, a top speed of 158 mph (255 km/h), 270 hp (201 kW / 273 PS at 8000 rpm) and it runs on any mixture of gasoline, bioethanol and methanol. Emerging technologies will allow alcohol fuels such as methanol, already a proven internal combustion fuel, to be made synthetically from CO2 extracted from the atmosphere.
An alcohol-based fuel derived renewably from atmospheric CO2 would allow society to transfer relatively easily to sustainable, carbon-neutral internal combustion. Lotus Engineering is researching the use of sustainable synthetic alcohols as potential future fuels, with technology available from Lotus for introduction in four to five years. However, the supply infrastructure investment from governments and fuel companies could take 15 to 20 years.

The Exige 270E Tri-fuel is part of Lotus’ research to understand the complex combustion process involved in running on mixtures of alcohol fuels and gasoline, which will be important for a successful transition from today’s fuels to the sustainable, synthetic fuels of the future.
This research is just one aspect of Lotus Engineering’s ground-breaking work on environmentally-friendly vehicles. It is involved with a number of electric vehicle projects, has successfully integrated hybrid technologies into vehicles such as its EVE demonstrator, and recently announced results on a collaboration with Continental Division Powertrain on the Low CO2 downsized three-cylinder engine. The research into sustainable alcohols is progressing at Lotus’ Hethel headquarters in Norfolk, UK and involves input from the Royal Society of Chemistry’s Alternative Fuel Symposium Series, the Low Carbon Vehicles Innovation Platform, developed by the Technology Strategy Board and direct discussions with the University of Sheffield.

Methanol (CH3OH) can be produced synthetically from CO2 and hydrogen. Ultimately, emerging processes to recover atmospheric CO2 will provide the required carbon that can entirely balance the CO2 emissions at the tailpipe that result from the internal combustion of synthetic methanol. The result is that a car running on synthetic methanol, such as the Exige 270E Tri-fuel would be environmentally neutral.
As well as being green, the great benefit of synthetic methanol is that it would use similar engines and fuel systems to those in current cars; and synthetic methanol can be stored, transported and retailed in much the same way as today’s liquid fuels such as gasoline and diesel.

Synthetic methanol also possesses properties better suited to internal combustion than today’s liquid fuels, giving improved performance and thermal efficiencies. And it is ideal for pressure-charging (turbocharging and supercharging) already being introduced by manufacturers to downsize engines in a bid to improve fuel consumption.

Lotus Engineering’s Lotus Exige 270E Tri-fuel technology demonstrator illustrates how easy it is for synthetic methanol to be embraced over time as a future fuel for road transport. The Exige 270E Tri-fuel, with its supercharged 2ZZ-GE VVTL-i engine, could be the forefather of a new generation of conventionally driven cars that have the potential to be environmentally-neutral.

Mike Kimberley, Chief Executive Officer of Group Lotus plc, explains: “Lotus is a world-class leader in research into a variety of alternative fuels; each has its merits and challenges and some options could be more easily implemented than others. But while motorists want to be green, we do not want to change the culture of total freedom for the owners, who will have an extreme reluctance to spend more at the pump, or to sacrifice the performance of their cars.

Mike Kimberley continues, “At present, the motor industry is seeking a route to reduce CO2 emissions just at the tailpipe; this focus is far too narrow. A sustainable alcohol such as synthetic methanol has the potential to reduce the overall CO2 footprint of internal combustion vehicles towards zero. Produced through CO2 recovered from the atmosphere and given a tax incentive, it immediately becomes a green, cheap and more desirable fuel. For those compelling reasons motorists, legislators and car manufacturers must switch to a sustainable alcohol like synthetic methanol.”

Geraint Castleton-White, Head of Powertrain at Lotus Engineering explains: “For car companies and the motorist, the use of sustainable alcohols like synthetic methanol requires relatively few changes to the vehicle. It can also use the current fuel distribution infrastructure, which is a huge advantage for suppliers.
Geraint Castleton-White continues, “We believe that, technically, there are a small number of significant but by no means insurmountable hurdles to the adoption of synthetic methanol as the staple future fuel for internal combustion. We are some way into a number of extensive research projects but of course, we understand that further research needs to be undertaken to fully overcome potential challenges that may arise.”
David Bott, Director of Innovation Platforms within the Technology Strategy Board in the UK says: “The approach taken by Lotus Engineering is a good balance between the desire for the lowest carbon emissions and the practicality of car evolution. The drive for low carbon transport is a real imperative and its progress will require short, medium and long term solutions.”
Tony Ryan, ICI Professor of Physical Chemistry at the Department of Chemistry at The University of Sheffield says: “There is a great opportunity to develop methanol as a transport fuel in a mixed energy economy that embraces a wide range of primary energy sources, including nuclear, solar, and other renewable power sources. Combining atmospheric CO2 with hydrogen to form methanol provides a pathway to personal transport with low carbon emissions that uses the existing liquid-fuel infrastructure and Lotus Engineering offers world leadership in the development of engines to use these fuels of the future.”

The Lotus Exige 270E Tri-fuel
The Lotus philosophy is all about performance through light weight. The Exige 270E Tri-fuel is built to the lightest specification possible without resorting to expensive and rare materials. The performance improvements of using synthetic alcohol have been made through increasing the power of the engine without increasing its weight and therefore the overall weight of the car.

The Engine
The heart of the Exige 270E Tri-fuel is a Roots-type supercharger (with a sealed-for-life internal mechanism meaning that it does not require the use of the engine’s oil) and air to air intercooler attached to the tried and tested 4-cylinder, 1.8 litre 2ZZ-GE VVTL-i engine. Using a development of the supercharger and intercooler package from the Exige S, the Exige 270E Tri-fuel has peak power of 270 hp (201 kW / 273 PS) at 8000 rpm, 184 lbft (260 Nm) of torque at 5500 rpm, up by 51 hp (38 kW, 52 PS) or 19% and 25 lbft 45 Nm or 14% over the standard gasoline Exige S. Maximum engine speed is 8000 rpm (8500 rpm transient for up to 2 seconds).
The low carbon number alcohol fuels methanol and ethanol give more power when burned in the engine than conventional gasoline (petrol) fuel. The performance benefits come largely from the high heats of vaporization of methanol and ethanol, which give strong charge-cooling effects, and the increased octane ratings. There are other secondary thermodynamic effects. Methanol's higher heat of vaporization leads to a slightly higher performance relative to ethanol. All charge air ducting has been kept as short as possible with large diameter pipes making sure that the bends in these ducts are not too tight, to the benefit of throttle response and efficiency. The Roots-type Eaton M62 supercharger is turned by the crankshaft, and has an integral bypass valve for part load operation.

The 2ZZ VVTL-i engine has two cam profiles – a high speed cam and a low speed cam. The seamless switch point between these two cams is completely variable depending upon driving conditions and engine load. This gives the Lotus Exige 270E Tri-fuel a smooth and linear surge of power from idle speeds all the way to the maximum 8500rpm. An electronic drive-by-wire throttle ensures the quickest engine response possible whilst keeping the emissions as clean and as low as possible, to meet relevant legislative demands. Six fuel injectors have been fitted to increase fuel flow to the engine at normal and higher engine speeds and loads.

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Facebook Themes